Type 303 stainless steel is a high-strength metal that has excellent corrosion and temperature resistance. It can withstand repeated sterilization cycles (EtO and/or steam autoclaving) and it is easy to clean and maintain.

Durastar MN611 has sparkling clarity, excellent toughness, and chemical resistance. Durastar is biocompatible according to ISO 10993 and it is a USP Class VI material. This material is used to mold our disposable chambers, which are single-use devices and are sold individually-packed and sterile.

* 500ml & 600ml Ultem chambers are only available in molded versions.

Each chamber includes:
One installed o-ring
One 533 µm wire mesh screen

1. Female Luer fitting for Biorep Thermoprobe (most popular).
2. Thermowell connector for BNC thermocouple.

We recommend removing and disposing of the o-ring before autoclaving the chamber. Before re-using the chamber, insert a brand new o-ring each time. Using sharp tools to remove the o-ring can cause damage to it, which could compromise the seal.

Refer to the serial and model number on the bottom of your autoclavable chamber. Contact Biorep at sales@biorep.com with the serial and model number and we will determine the o-ring size and provide you with the part number. Examples of model numbers are 600-U-2 or 6U09D.

We recommend autoclaving the chamber lid and base in separate pouches. It is best not to leave the lid attached to the base during autoclaving. Leaving the screws tight during autoclaving might eventually cause cracking. The stainless steel and Ultem plastic expand at different rates, which can lead to high stresses and reduce the life of the parts.

All of our products come with a 1 year manufacturer’s warranty. If for any reason our product fails prematurely, please follow the procedure below:

E-mail a written description and two pictures of the problem to sales@biorep.com.

Shipping instructions will be provided to you, so that you can return the malfunctioning product to Biorep.
The product will be evaluated at Biorep and a non-conformance report will be generated.

If the product is still under warranty, a brand new replacement will be shipped to you as soon as possible.

If for any reason you have a problem with a product, please follow the procedure below:

E-mail a written description and two pictures of the problem to sales@biorep.com.

Shipping instructions will be provided to you, so that you can return the malfunctioning product to Biorep.

The product will be evaluated at Biorep and a non-conformance report will be generated.

If the product is still under warranty, a brand new replacement will be shipped to you as soon as possible.

Disposable products are exposed to gamma radiation or ethylene oxide and are designed for single-use only.

Re-using these products is not recommended.

We do not recommend re-using the stainless steel coils. The coils go through a rigorous cleaning and passivation process. Both ends are then capped to prevent contaminants from entering the coil. The coils are not sold sterile and should be sterilized (EtO or steam autoclave) before the first use. Attempting to clean the coils after use is not recommended.

Biorep Technologies offers optional “Annual Service Agreements” for all of our machines, which extends the machines warranty past the initial year of coverage.

None of our equipment requires any special setup. The Diabetes Research Institute (Miami, FL) is open to collaboration and offers free training to other centers. We can help coordinate any training at the DRI (please contact us a month in advance as paperwork needs to be completed). If coming to the DRI is not practical, we could also offer on-site training. Please contact us for a quote at sales@biorep.com

No. We sell everything through our Miami factory. We can ship worldwide either with your own carrier or via UPS Expedited.

No. We strive to offer fair and reasonable prices for all our products.